Installation Guide

061119-1
Plastic Development Group, LLC, Southfield, MI 48075 • www.plasticdevelopmentgroup.com Made in China
Step 7: To increase lid closure resistance, turn adjustment screw clockwise.
To reduce lid closure resistance, turn adjustment screw counter-clockwise.
Step 6:
Attach the
2 Soft Close
Devices to
the Lid and
Side Panels
with the 8with the 8
Machine
Screws.
Side Panel
Lid Panel
Soft Close
Device
Step 5:
Hold the Lid Panel
horizontally and line
up the Lid Tabs with
Back Panel Hinge
Pins. Push Lid Panel
horizontally into Backhorizontally into Back
Hinge Pins and rotate
the Lid closed to lock
into place.
Hinge Pins
Lid Panel
Lid Tabs
Step 4:
Slide Front Panel
into position using
the slots at the front
of the Side Panels.
Press the Lock-Tabs
into the slots in theinto the slots in the
Bottom Panel to
lock in place.
Lock-Tab Slots
Side Panel
Front Panel
Step 3:
Slide Back Panel
into position using
the slots at the rear
of the Side Panels.
Press the Lock-Tabs
into the slots in theinto the slots in the
Bottom Panel to lock
in place.
Lock-Tab Slots
Side Panel
Back Panel
Step 2:
Slide a Side Panel onto
the Bottom Panel then
repeat with the other.
Bottom Panel
Side Panel
Step 1:
Place Bottom Panel
on a level surface.
Bottom Panel
Lid Support (pre-assembled on panel)
Soft
Close
Device
Machine
Screws
Bottom PanelLid Panel
Back PanelFront PanelSide Panels (2 pcs)
Parts Included:
Patent Pending
Item Nos.: DB105WLJ-SC & DB105WLG-SC
105 gal Deck Box Assembly Instructions