Plantronics Voyager® PRO User Guide
Welcome Registering Your Product Thank you for purchasing the Plantronics Voyager PRO headset. This guide contains instructions for setting up and using your new headset. Visit www.plantronics.com/productregistration to register your product online so we can provide you with the best service and technical support. Please refer to the separate For Your Safety guide for important product safety information prior to use of the product.
Contents Package Contents and Accessories............................................ iv Charging Your Headset.................................................................2 Checking the Battery Status...............................................3 Automatic Battery Status Alerts..........................................3 Pairing Your Headset.....................................................................4 How to Pair Your Headset for the First Time.......................4 Adjusting the Fit........
Package Contents and Accessories Volume Up (+) and Down (-) Buttons Mute (press +/- buttons simultaneously) Call Control Button Status Indicator (LED) Power On/Off Button Micro USB Charging Jack Microphones iv
Package Contents and Accessories Soft Gel (S, M, L) Eartips and Foam Eartip Cover Call Control Button Charging Case Status Indicator (LED) Power On/Off Button AC Charger EN Eartip For a complete list of accessories available for purchase, go to www.plantronics.com.
Charging Your Headset Using the AC Charger Your new headset performs best when fully charged. 1 Plug the AC charger into a power outlet. 2 Connect the AC charger to the charging jack on the headset. charging status indicator light Charge Level Charging time 2 hours ........................... Full charge 30 minutes . ....................
Charging Your Headset Checking the Battery Status Automatic Battery Status Alerts Your headset is equipped with an embedded, non-replaceable battery that can be recharged. When the battery charge is very low, a vocal warning and tone will automatically occur. To check the status, the headset must be powered on. Tap the power button and the indicator light flashes red to show the battery charge level.
Pairing Your Headset Pairing is the process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth® enabled phone. Your new headset includes Plantronics QuickPair Technology to simplify the Bluetooth setup process. The first time you turn your earpiece on, your earpiece automatically enters pairing mode for 10 minutes. Once paired successfully, your earpiece stays on for instant use.
Pairing Your Headset SSP, your phone will automatically locate and pair with this headset. SETTINGS Time and Date Phone Settings Bluetooth 3 Use the commands on your phone to locate your headset. For most phones, select Settings/Tools > Connections > Bluetooth > ProPlantronics. See your phone’s user guide for more information. Sound Settings 1 Network Services Security Reset Settings 2 4 When prompted for the Passkey/PIN code, enter 0000.
Adjusting the Fit 1 Place the earloop behind your ear and rotate the headset so that the speaker rests comfortably in your ear. 2 Align the microphone with the corner of your mouth. For optimal voice clarity, pivot the boom toward the corner of your mouth. 1 2 3 The headset can be worn on either ear 3 by swiveling the speaker housing and closed boom.
Adjusting the Fit Changing Ear Tips The headset comes with the medium eartip installed, but you can replace it with the optional small or large eartip provided. 1 1 To remove the eartip, grip the eartip with your thumb and forefinger. Gently push it down and rotate it a quarter turn to the left to align with slots on the eartip with the speaker housing. Gently lift the eartip away from the headpiece. 2 To attach a new eartip, align the tabs on 2 EN the eartip with the slots on the speaker housing.
Headset Controls and Indicators Action Indicator Light Tone Reject call Press call control for 1 second None Single low tone Missed call Tap call control to dismiss indicator Triple purple flash until dismissed None Mute call Press volume up and down buttons simultaneously for 1 second None Mute on: Headset whispers “Mute On” followed by low-high tone, then low tone every 5 minutes Tap volume up or volume down Single blue flash Adjust the volume (during call) Mute off: Headset whispers “Mu
Headset Controls and Indicators Indicator Light Tone Double-tap call control button None Double low tone Voice-activated dialing Press call control button for 1 second None Single low note (phone may then prompt you to say a name) Transfer a call from headset to phone or from phone to headset While on a call, press call control button for 1 second None Single followed by double low tones Check status Press any button Short blue flash None Enable/disable call indicator Press power and volum
Product Specifications 10 Talk time* Up to 6 hours Standby time* Up to 5 days or 120 hours Range* Up to 33 feet (10 meters) Headset weight 17.5 grams Battery type Lithium ion polymer Charge time 2 hours for full charge Bluetooth version 2.
Using More Than One Bluetooth Phone Plantronics Voyager PRO supports multipoint technology, which allows you to use one headset with two different Bluetooth mobile phones. To pair an headset to a second phone, see “Pairing Your Headset” on page 4. How to Initiate a Call The headset initiates a call on the phone you most recently used. To use the second phone, initiate the call using the controls on the second phone. The second phone forms an active link with the headset.
Troubleshooting My phone did not locate the headset. Turn both your phone and headset off and on, and then repeat the pairing process on page 4. I could not enter my PIN code/Passkey. Turn both your phone and headset off and on, and then repeat the pairing process on page 4. Your Passkey/PIN code is 0000. I cannot hear caller/dial tone. The headset may not be turned on. Tap the call control button. If a blue light flashes then the headset is on.
IMPORTANT SAFETY AND OPERATIONAL INFORMATION Please read the following safety and operational instructions before using your Bluetooth earpiece and accessories. Please keep these instructions for your reference. Additional warnings may be present on the product, packaging, or in the user instructions. This symbol warnings.
• Keep all products, cords, and cables away from operating machinery. As with all corded products, there is a danger of strangulation if a cord should become wrapped around your neck. • This product is not a toy. Never allow children to play with the product– small parts may be a choking hazard. • Install and use eartips and earbuds in accordance with the instructions provided. Do not force eartips or earbuds down the ear canal. If either becomes lodged in the ear canal, seek medical attention immediately.
BATTERY WARNINGS To avoid the risk of explosion, fire or leakage of toxic chemicals, please observe the following warnings: • Do not dispose of the product or battery in a fire. The battery cells may explode. • Do not open or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. • Always store batteries where children cannot reach them.
Regulatory Notices Industry Canada Radio Equipment The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. “Privacy of communications may not be ensured when using this telephone.
Limited Warranty This warranty covers defects in materials and workmanship of products manufactured, sold or certified by Plantronics which were purchased and used in the United States and Canada. The warranty lasts for one year from the date of purchase of the products. This warranty extends to you only if you are the end user with the original purchase receipt. We will, at our option, repair or replace the products that do not conform to the warranty.
345 Encinal Santa Cruz, CA 95060 United States Tel: 800-544-4660 www.plantronics.com ©2008 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Vopyager, QuickPair, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. US Patents Pending.
