PLANTRONICS + POLYCOM.
Contents Controls and status lights 3 USB Bluetooth adapter 3 Setup 5 Mobile setup 5 Corded setup 5 USB adapter setup (BT600 models only) Configure USB adapter 6 Load software 6 Charge 7 Check battery status 7 Charge 7 Charge your mobile phone 5 7 Daily Use 8 Power 8 Answer or End a call 8 Mute/Unmute 8 Volume 8 Voice assistant (smartphone feature) 8 Microsoft Teams button (Teams models only) Customize your speakerphone 8 Support 8 9 2
Controls and status lights A portable speakerphone with mobile and corded connectivity.
USB LEDs What they mean Flashing blue On a call Solid red Mute active Flashing purple Streaming media from computer LEDs when Microsoft Teams* is detected USB LEDs What they mean Flashing red and blue Pairing Solid purple Headset connected Flashing blue On a call Solid red Mute active Pulsing purple Microsoft Teams notification NOTE *Requires Microsoft Teams application 4
Setup Mobile setup 1 Turn on your speakerphone and press the Bluetooth button for 2 seconds. You hear "pairing" and the LEDs pulse white. Device Controls Headphones Headset Blutooth 2 Activate Bluetooth on your phone and set it to search new devices, select “Poly Sync 20.” 3 Pairing is successful when you hear "pairing successful" and the LED flashes blue.
NOTE Adapter design may vary Pairing is successful when you hear "pairing successful; PC connected" and the adapter LED turns solid blue. Configure USB adapter Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music, you will need to configure your Bluetooth USB adapter. Windows 1 To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab. Select Plantronics BT600, set it as the Default Device and click OK.
Charge Check battery status Charge Charge your mobile phone To check the battery status of your speakerphone, slide the power button to the right and release. Charge the speakerphone via USB using your computer or a USB AC adapter (not provided). The LED bar pulses while charging and turns off when fully charged. Allow 4 hours for a full charge. With the speakerphone powered on, charge your phone by connecting your phone's charge cable to the speakerphone USB port (cable not provided).
Daily Use Power Answer or End a call Mute/Unmute Volume Voice assistant (smartphone feature) Microsoft Teams button (Teams models only) Customize your speakerphone Slide the Power button to the right to power on. The speakerphone LED bar illuminates white. A short press of the Call button answers or ends a call. A short press of the Mute button mutes or unmutes the microphones. Press the up (+) or down (-) volume buttons for the desired volume.
Support NEED MORE HELP? poly.com/support Plantronics, Inc. Plantronics B.V. 345 Encinal Street Scorpius 171 Santa Cruz, CA 95060 2132 LR Hoofddorp United States Netherlands © 2020 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.
