GET TALKING IN MINUTES M20™ and M50™
TAKE A GOOD LOOK MICRO USB CHARGING PORT CALL BUTTON • Take a call or end it (1 tap) • Redial (2 taps) • Use with the AC wall charger: 1 hour before first use 2 hours (100% charge) • Do not use headset while charging • Initiate phone’s voice-dialing (2-second press until tone is heard) • Reconnect lost Bluetooth connection (1 tap if the headset doesn’t automatically reconnect) VOLUME BUTTONS • Volume presets (1 tap per level change) • Activate pairing mode after initial set up (press until red/blue LED
CONNECT TO YOUR PHONE PLT_M50 “Pairing” is the set-up process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth-enabled phone. "Multipoint" lets you pair this headset with two phones so you can answer a call from either phone. You must activate multipoint before pairing second phone. 1. READY Activate the Bluetooth feature on your phone, then get phone to add / search / discover new Bluetooth devices.
FIT EITHER EAR 1 2 1 2 Right Ear Left Ear
TIPS Stay Near Your Phone Listen to Music and More (M50 series only) Bluetooth has a working “range” of up to 33 feet between the phone and headset before audio degrades and the connection is lost. If your phone also has the Bluetooth "A2DP" stereo music feature, then your music, podcasts, favorite internet radio and other streaming audio can be heard through this headset. Know How to Reconnect Your headset tries to reconnect a lost connection.
3.
NEED MORE HELP? Don’t return to the store - call our friendly customer support team at 1-866-363-2583 (USA) or visit plantronics.com/support for local numbers outside the US. © 2011 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. U.S. Patents Pending.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Industry Canada (IC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the IC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
