LEARN MORE M100™ Bluetooth® Headset
TAKE A GOOD LOOK CALL BUTTON • Take a call or end it (1 tap) • Redial (2 taps) • Initiate phone’s voice-dialing (2-seccond press until tone heard) • Reconnect lost connection (1 tap) • Activate pairing after initial set up (press until LED flashes red/blue) • Activate multipoint (press while powering on) • Transfer a call to/from headset (1-second press while on a call) POWER SWITCH • On (slide to reveal black) • Off (slide to reveal red) MICRO USB CHARGING PORT • With AC charger: 30 minutes (2 hours ta
CONNECT TO YOUR PHONE “Pairing” connects your headset to your phone. “Multipoint” lets you use this headset with two phones. (Activate this feature before pairing your second phone.) 1. READY 2. SET 3. CONNECT Activate the Bluetooth feature on your phone, then use the phone’s settings to add/search/discover new Bluetooth devices. First Time: With headset turned off, activate Bluetooth pairing mode by sliding Power switch on. The LED flashes red/blue to indicate pairing mode.
FIND YOUR GROOVE The loop of the gel eartip tucks into the back curve of your ear for a stable fit. Try on the headset. The eartip is positioned to suit most people, but you may want to rotate it to best fit your left or right ear. The gel eartip and speaker click into matching grooves so the eartip doesn’t move out of place during use. For Left Ear The loop on the gel eartip should point away from the headset. (Do not rotate the eartip too far.
MIX AND MATCH FOR BEST FIT If the gel eartip feels loose or tight in your ear, then change it. To replace the medium gel eartip for small or large, pull the loop of the gel eartip to remove it. (Don’t pull on the speaker base and stem.) Using your thumb, tuck the bottom of the eartip over the speaker and pull the loop of the eartip over the speaker. (Don’t push the speaker through the gel eartip.) If you aren’t familiar with this style of gel eartip, clip on the earloop to the stem for extra stability.
MORE ABOUT MULTIPOINT Plantronics M100 supports multipoint How to Initiate a Call technology, which allows you to use one When multipoint is on, the headset controls initiates or redials a call from headset with two different Bluetooth mobile phones. the phone that last made an outgoing call. To pair your headset to a second phone, see “Connect to Your Phone.” To use the second paired phone instead, make the call using the controls on that phone. The second phone activates its link with the headset.
LISTEN TO THE VOICE This headset whispers various status alerts when you power on/off, run low on talk time, or lose/reconnect the Bluetooth connection to your phone.
TIPS Pair/Connect Just Once Pairing is a one-time process unless your phone loses the connection or you want to pair a new phone. Stay Near Your Phone: Bluetooth has a working “range” of up to 33 feet between the phone and headset before audio degrades and the connection is lost. Watch for Flashing Red LED This headset will visually warn you when your battery is low and needs to be recharged. Know How to Reconnect: Your headset tries to reconnect a lost connection.
SPECIFICATIONS Talk Time Up to 6 hours Standby Time Up to 10 Days Operating Distance (Range) Up to 33 feet (10 meters), Class II Headset Weight 9 grams Headset Dimensions 55 x 18.5 x 8.1 mm Charge Connector Micro USB charging Battery Type Rechargeable non-replaceable lithium ion polymer Charge Time (Maximum) 90 minutes for full Power Requirements 5V DC – 180mA Bluetooth Version 2.1 specifications with EDR Bluetooth Profiles Hands-Free (HFP) Profile 1.5 and Headset (HSP) Profile 1.
NEED MORE HELP? Phone support in USA: 1-866-363-BLUE (2583) FAQs: www.plantronics.com/M100faq 1-year limited warranty details: www.plantronics.com/warranty © 2011 Plantronics, Inc. All Rights Reserved. Plantronics is a trademark or registered trademark of Plantronics, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. iPhone is a trademark of Apple Inc. registered in the U.S. and other countries.
