USER GUIDE PLANTRONICS PULSAR™ 260 STEREO BLUETOOTH HEADSET
WELCOME PACKAGE CONTENTS & FEATURES This user guide provides instructions on the setup and usage of the Plantronics Pulsar™ 260 Bluetooth® Headset. Before getting started, please review the safety booklet included in your package. Pulsar 260 headset Microphone with call control button For additional help, service or support information, refer to product warranty card or Troubleshooting on page 9, or visit www.plantronics.com.
CHARGING PAIRING You must charge for 3 hours before first use. To pair pod with phone: To charge, connect AC charger to pod miniUSB socket. Begin with pod powered on. 1 1. Press and hold both the mute/play/ pause button and the power on/off/ pairing button simultaneously. When the indicator light flashes red and blue, release buttons. Pod indicator light flashes red when charging and changes to solid blue when fully charged. 2.
WEARING OPTIONS POD CONTROLS Pulsar 260 can be worn in two ways: • Clipped to your belt or clothing • Around your neck using the lanyard Power on/off KEY POWERED SPEAKER & STEREO USES For public listening you can connect the stereo Bluetooth pod directly to powered speakers or your home stereo with the included audio-out cable (provided your speakers/home stereo is fitted with a Line-in or Auxiliary 3.5mm audio socket). Please consult your equipment guide. 1.
HEADSET CONTROLS KEY TROUBLESHOOTING FEATURE Action Tone Making/answering/ending calls Short key press High tone Switching an active call from headset to phone or phone to headset Long key press High tone followed by low Solution My headset does not work with my phone. • See page 5 “Pairing”. • Perform a reset on Pulsar 260 as described below. Callers cannot hear me. • Headset is muted. Press the mute button on the pod to unmute the microphone.
PRODUCT SPECIFICATIONS Listen time* Up to 7 hours Talk time* Up to 9 hours Standby time* Up to 200 hours Charge time 3 hours Range Bluetooth standard 10 metres Headset and pod weight 25 grams Power requirements 5VDC - 300 mA Battery type Lithium ion polymer Speaker frequency response • Telephony 300 Hz to 3600 Hz (CVSD) • Stereo audio 20 Hz to 20 kHz (16-bit 48 kHz SBC coding) Impedance 32 +-4 Ohms x1 kHz Distortion <5% to 19 kHz Version Bluetooth 2.
WARNINGS WARNING: Use of a headset that covers both ears will impair your ability to hear other sounds. Use of such a headset while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others and is illegal in most regions. Do not use headphones/headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels.
