PLANTRONICS Calisto® BLUETOOTH® HEADSET
Table of Contents 1. Packaging Contents 2. Initial Setup 3. Basic operations 4. Headset features 5. Product Specifications 6. Safety information 7. Warranty 8. Help/ Contact WELCOME Thank you for purchasing a Plantronics headset. Let us provide you with the best possible service and technical support. After you review this user guide, if you need additional assistance or have any product questions, please contact: • Plantronics Technical Assistance Center at 866-363-BLUE (2583) • www.plantronics.
Packaging Contents Your Plantronics Calisto headset should include the following items: Headset Charging Cable Printed Material Included: User guide Bluetooth safety booklet Initial Setup Once you have removed the contents of the packaging, your first step is to prepare the headset for initial use. Charge headset for a minimum of 3 hours before initial use.
Headset Wearing Tips: 1. The headset can be worn on your left or right ear. To switch to left ear, flip the ear loop to the side, and twist around as shown. 2. The ear tip should fit comfortably in the opening of your ear canal. It may take some adjusting to find a comfortable and secure fit. 3. Make sure the mouthpiece is pointing toward your mouth for optimal performance Basic Operations Powering up: Press and hold Headset button for 2 seconds.
Headset Features Plantronics Calisto Headset Before using, you must first charge your headset (see instructions in initial setup section). For the best user experience, always keep your headset fully charged. Pairing headset with your mobile phone - Before you begin, be sure your mobile phone has Bluetooth headset capability. Turn Calisto headset off by holding down the headset button for 6 seconds, or until red light appears solid for 1 second before going away.
Answering mobile calls using headset - When a call comes in, your phone will ring and an incoming call earcon (beep) will sound in the headset. Simply press the headset button once to answer the mobile phone call. Headset functions Action Lights Beeps Mobile phone pairing Start with Power Off, press button for 2 sec. (mobile phone should be in pairing mode) alternates blue/red 1 beep at beginning, 1 beep when completed Power On Press button for 2 sec. flash for 2 sec.
- Power Requirements 5V DC – 300 mA Battery Type Lithium Ion Polymer Version Works with Bluetooth 1.1 or higher Storage and Usage Temperature 50F–104F (10C – 40C) Supports Bluetooth hands-free and headset profiles. *Performance may vary by device. **Headset can last up to four days without charging, based on average talk time of 1.5 hours per day. Safety Information ATTERY PRECAUT SOUND WARNING: Exposure to high volume sound levels may damage your hearing.
REGULATORY NOTICES EXPOSURE TO RADIO FREQUENCY RADIATION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules and Industry of Canada technical specifications of the RSS210.
