Plantronics Explorer® 240 & 395 User Guide
Welcome Thank you for purchasing the Plantronics Explorer 240 or 395 headset. This guide contains instructions for setting up and using your new headset. Before using this product, please refer to the For Your Safety booklet for important safety, charging, battery and regulatory information. Getting Assistance The Plantronics Technical Assistance Center is ready to assist you.
Contents Package Contents and Features............................................................iv Charging Your Headset.......................................................................... 1 Using the AC charger................................................................... 1 What is Bluetooth®?.............................................................................. 2 Plantronics QuickPair® Technology...............................................
Package Contents and Features Note Your headset may look different than the illustration, but will still work as described. Headset Front* Volume Control Button Call Control Button Status Light Power On/Off Switch Swivel Earloop [fits either ear] Headset Back Microphone Speaker/Eartip Micro USB Charging Jack Power On/Off Switch AC Charger 100 – 240V * For illustration purposes only; designs will vary by model number.
Charging Your Headset Your new headset performs best when it is fully charged. While your headset is charging, the indicator light glows red. When your headset is fully charged, the indicator light turns blue. Do not use your headset while it is connected to the charger. How to Charge Your Headset Using the AC Charger 1 2 Plug the charger into a power outlet. Connect the charger cable to the headset. 1 1 Charging time 2 hours........................ Full charge 1 hour..........................
What Is Bluetooth? Bluetooth wireless technology provides a way for devices, like headsets and phones, to communicate with each other without wires. Pairing is the set-up process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth-enabled phone. Plantronics QuickPair™ Technology To simplify the Bluetooth setup process, your new headset uses Plantronics QuickPair technology. This process is shown on the next page.
Pairing Your Headset 1 SETTINGS Time and Date Phone Settings Bluetooth Sound Settings Network Services 2 3 BLUETOOTH Discover/ Search BLUETOOTH Security Reset Settings 2XXPlantronics PASSKEY 4 0000 How to Pair Your Phone With Your Headset for the First Time 1 Turn on the Bluetooth feature on your phone. For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phone’s user guide for more information. 2 Turn the headset on.
Adjusting the Fit 1 2 The headset comes out of the box with the earloop in place to wear on your right ear. 1 Place the earloop behind your ear. Rotate the headset so that the speaker rests comfortably in your ear. 2 Align the microphone with the corner of your mouth. Callers can hear you best when you point the microphone towards the corner of your mouth.
Adjusting the Fit 1 2 Right Left It’s easy to move the earloop to fit on your left ear. 1 2 Lift the earloop. Swivel the earloop to the right and push it back down.
Tap the Call Control button. Press and hold the Call Control button until you hear a low tone. Briefly press any button to cancel the indicator light. Reject an incoming call Missed call indicator Off: Slide the Power Switch to the “Off” position. On: Slide the Power Switch to the “On” position. Answer/end a call Turn the headset on or off Action Two simultaneous red/ blue flashes, a pause, then two more red/blue flashes (repeating for 5 minutes or until cancelled).
Tap the Volume button to Single blue flash for every increase through 4 levels; volume level change. tap at top level to return to lowest volume setting. Adjust the volume (during call) 1/3 - 2/3 full Less than 1/3 full 2 3 Low tone at every volume level change. (Two tones at maximum volume level.) Low battery tone indication: 3 tones when under 5 minutes talk time is remaining. None when checking level.
Press and hold the Call Control button until you hear a tone. Tap the Call Control button twice. While the call is in progress, press and hold the Call Control button until you hear a tone. Voice Dial Redial last number Transfer a call from headset to phone, or from phone to headset Action None Long low tone when moving to phone; short low tone when moving to headset. Two brief low tones Single low tone; phone may prompt with “Name please” or tones.
Troubleshooting My headset does not work with my phone Your headset may not have been in pairing mode when your phone was searching for it. Repeat the pairing process on page 3. You may have made incorrect menu selections on your phone while pairing. Repeat the pairing process on page 3. Callers cannot hear Make sure the headset Power Switch is in the ON position. me, or I cannot hear callers/dialing Your headset may be out of Bluetooth range tone or experiencing interference.
Product Specifications Talk Time* Up to 5 hours Standby Time* Up to 7 days Charge Time 2 hours Range Up to 10 meters (33 feet) Power Requirements 5V DC – 180 mA Battery Type Rechargeable, non-replaceable, lithium ion polymer Storage/Usage/ 0º C - 40º C (32º F - 104º F) Charging Temperature Bluetooth version 2.1 + EDR (Enhanced Data Rate) Supports your phone’s Bluetooth Hands-free (HFP), Headset (HSP) and Secure Simple Pairing (SSP) profiles. * Battery enabled. Performance may vary by device.
For safety information, see the separate “For Your Safety” booklet. For warranty information, see the separate “2 Year Warranty” leaflet or visit www.plantronics.com en Plantronics Ltd Wootton Bassett, UK Tel: 0800 410014 ar www.plantronics.com cs Czech Republic www.plantronics.com da Danmark Tel: 80 88 46 10 de Plantronics GmbH Hürth, Deutschland Kundenservice: Deutschland 0800 9323 400 Österreich 0800 242 500 Schweiz 0800 932 340 el www.plantronics.
МЛ05 Plantronics B.V. Scorpius 140 2132 LR Hoofddorp Netherlands www.plantronics.com © 2010 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc., and are used by Plantronics, Inc. under license. All other trademarks are the property of their respective owners. U.S.
