0ft x 6ft Patio Umbrella User Guide A Item A B C Description finial upper pole with canopy bottom pole B C 1
Table of Contents Description Compatible Bases Assembly & Opening Tilting Replacing Canopy Cleaning & Storage Questions & Warranty 2 Page 3 4 5 6-7 8 9
Compatible Bases The following table shows the minimum weight of umbrella base required. It is recommended to always use a table in addition to an umbrella base.
Assembly & Opening step 1 step 2 1 A 2 B 1. Press the button on the upper pole in. 2. Slide bottom pole onto upper pole until the button clicks into the hole on the bottom pole 4 1. Turn the crank handle clockwise until the umbrella is fully opened.
Tilting step 1 1. Press the tilt button in fully step 2 1.
Replacing Canopy step 1 1. Unscrew the finial at the top of the umbrella 6 step 2 1. Pull the canopy pockets off the frame one rib at a time 2.
Replacing Canopy step 3 step 4 1. Drape the new canopy over the frame 2. With canopy in place, screw finial back on 1. Match a short rib to a short umbrella pocket. Put the frame ribs back into the umbrella pockets. Take care to not skip any pockets.
Cleaning & Storage cleaning Spot clean with mild soap and water. Allow to air dry. Never use bleach or harsh cleaners. storage Umbrella MUST be used with appropriate base and/or table. See Page 3. Do not leave open umbrella unattended. Store when not in use or during inclement weather. Not recommended for windy conditions.
Questions & Warranty If you have any additional questions or would like to make a warranty claim, contact our customer service department listed below. Customer Service: cs@plantationpatterns.
