User`s guide

Abnormal* Transmit Error: a trap when there are transmit data
error in copper port.
Abnormal*: 50 error packet count within 10 seconds.
 PoE Events: Monitoring the PoE ports status.
PoE Power fail: a trap when the port’s power source is fail or the
SW-0008FP is fail.
Power on/Power down: a trap when the PoE port’s power is on
and down.
Power over current: a trap when the PoE port’s power is over
current.
Power short circuit: a trap when the PoE port’s power circuit was
short.
Set Password
Password is the invaluable tool for the manager to secure Web
Management Switch, use this function to change the password.
If you forget the password, press the “Reset” button in the rear panel
of the Switch, the current setting includes VLAN, Port Setting… etc.
will be lost and the Switch will restore to the default setting.
Figure 34. Set Password
37