User`s guide

Figure 28.
Press “Refresh” button to refresh the status of the PoE.
Press click on the ID parameter to enter to the selected port to
configure the PoE settings, select enable to activate the PoE function
from port 1 to port 8, and disable to deactivate the PoE function. Click
“Apply” button to save the setting.
Figure 29.
Device Status
Click on the “Status” to present the device status on this screen, it will
show the System Status, Port Status, VLAN Status, Trunk Status,
Mirror Status, QoS Status and PoE Status.
Press “Refresh” when you need to renew the posted information.
33