User`s guide

Port Settings
In Port Settings menu (Figure 16), this page will show each port’s
status, press the ID parameter to set each port’s Speed, Flow Control,
Rate Control Ingress and Egress. When you need to renew the posted
information, press the “Refresh” button.
The Link Status in the screen will show the connection speed and
duplex mode; else this dialog box will show down when the port is
disconnected.
Figure 16. Port Configuration
To change the port setting, click on the ID parameter to enter to the
selected port to configure its Speed/Disable, Flow control and Port
Bandwidth Rate Control Ingress and Egress.
Figure 17.
Speed/Disable:
This setting has six modes—100M Full, 100M Half, 10M Full, 10M
Half, Auto and Disable—for speed or port disable selections.
25