User`s guide

 Device status and Statistic

Before you configure this device, note that when the SW-0008FP is

configured through an Ethernet connection, make sure the manager

PC must be set on same the IP network. For example, when the

default network address of the default IP address of the Web Smart

Switch is 192.168.1.254, then the manager PC should be set at

192.168.1.x (where x is a number between 1 and 253), and the default

subnet mask is 255.255.255.0.

Open Internet Explorer 5.0 or above Web browser.

Enter IP address

http://192.168.1.254 (the factory-default IP address

setting) to the address location.

Figure 12.

Or through the Web Management Utility, you do not need to

remember the IP Address, select the device shown in the Monitor List

of the Web Management Utility to settle the device on the Web

Browser.

When the following dialog page appears, remain enter the default

password "admin" and press Login to enter the main configuration

window.