User`s guide

Monitor Load: To manually load the setting file of the Monitor List.

Exit: To exit the Web Management Utility.

In the “View TAB”, there are view log and clear log function, this

function will help you to show trap setting.

View Log: To show the event of the Web Management Utility and

the device.

Clear Log: to clear the log.

In the “Option TAB”, there are Refresh Time function, this function

helps you to refresh the time of monitoring the device. Choose 15 secs,

30 secs, 1 min, 2 min and 5 min to select the time of monitoring.

In the “Help TAB”, there is About function, it will show out the

version of the Web Management Utility.

Configuring the Switch

The SW-0008FP has a Web GUI interface for smart switch

configuration. The Switch can be configured through the Web

Browser. A network administrator can manage, control and monitor

the switch from the local LAN. This section indicates how to

configure the Switch to enable its smart functions including:

 Port Setting (Speed/Disable, Flow Control and Port Bandwidth

Rate Ingress/Egress)

 VLAN Setting (802.1Q VLAN)

 Trunking

 Port Mirroring

 QoS Setting

 PoE Setting

 System Setting