User`s guide

IDENTIFYING EXTERNAL COMPONENTS

This chapter describes the front panel, rear panel, and LED indicators

of the Switch.

Front Panel

The figure below shows the front panels of the Switch.

Figure 3. Front panel of SW-0008FP

Reset:

The Reset button is to reset all the setting back to the factory default.

Note: Be sure that you recorded the setting of your device, else all

the setting will be erased when pressing the ì Resetî button.

LED Indicator:

Comprehensive LED indicators display the status of the switch and

the network (see the LED Indicators chapter below).

PoE Ports :

These ports are PoE Enable ports, the PoE port will automatically

activated when a compatible terminal is identified, the Switch will

supply power through the Ethernet port to the connected PoE device.

For the Legacy devices that are not yet compatible, the PoE port will

not offer the power to this device. This feature allows users to freely

and safely mix legacy and Power over LAN compatible devices on

their network