System information

Command Line Interface
4-10
4
Command Groups
The system commands can be broken down into the functional groups shown below.
Table 4-4 Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode, restarting the
system, or quitting the CLI
4-11
System Management Display and setting of system information, basic modes of operation,
maximum frame size, file management, console port and telnet
settings, system logs, SMTP alerts, and the system clock
4-16
Simple Network
Management Protocol
Activates authentication failure traps; configures community access
strings, and trap receivers
4-55
User Authentication Configures user names and passwords, logon access using local or
remote authentication, management access through the web server,
Telnet server and Secure Shell; as well as port security, IEEE 802.1X
port access control, and restricted access based on specified IP
addresses
4-69
Access Control List Provides filtering for IPv4 frames (based on address, protocol, TCP/
UDP port number or TCP control code), IPv6 frames (based on
destination address, next header type, or flow label), or non-IP frames
(based on MAC address or Ethernet type)
4-104
Interface Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
4-120
Link Aggregation Statically groups multiple ports into a single logical trunk; configures
Link Aggregation Control Protocol for port trunks
4-131
Mirror Port Mirrors data to another port for analysis without affecting the data
passing through or the performance of the monitored port
4-141
Rate Limit Controls the maximum rate for traffic transmitted or received on a port 4-143
Address Table Configures the address table for filtering specified addresses, displays
current entries, clears the table, or sets the aging time
4-144
Spanning Tree Configures Spanning Tree settings for the switch 4-148
VLANs Configures VLAN settings, and defines port membership for VLAN
groups; also enables or configures private VLANs and protocol VLANs
4-167
Class of Service Sets port priority for untagged frames, selects strict priority or weighted
round robin, relative weight for each priority queue, also sets priority for
TCP/UDP traffic types, IP precedence, and DSCP
4-184
Quality of Service Configures Differentiated Services 4-197
Multicast Filtering Configures IGMP multicast filtering, query parameters, and specifies
ports attached to a multicast router
4-205
Domain Name Service Configures DNS services. 4-214
IP Interface Configures IP address for the switch 4-221