System information

Command Line Interface
4-8
4
To enter the other modes, at the configuration prompt type one of the following
commands. Use the exit or end command to return to the Privileged Exec mode.
For example, you can use the following commands to enter interface configuration
mode, and then return to Privileged Exec mode
Table 4-2 Configuration Command Modes
Mode Command Prompt Page
Line line {console | vty} Console(config-line)# 4-31
Access
Control List
access-list ip standard
access-list ip extended
access-list mac
access-list ipv6 standard
access-list ipv6 extended
Console(config-std-acl)
Console(config-ext-acl)
Console(config-mac-acl)
Console(config-std-ipv6-acl)
Console(config-ext-ipv6-acl)
4-104
4-106
4-116
4-111
4-112
Class Map class map Console(config-cmap) 4-198
Interface interface {ethernet port | port-channel id| vlan id} Console(config-if)# 4-120
MSTP spanning-tree mst-configuration Console(config-mstp)# 4-154
Policy Map policy map Console(config-pmap) 4-200
VLAN vlan database Console(config-vlan) 4-167
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#