System information

Contents
xv
show queue mode 4-188
show queue bandwidth 4-189
show queue cos-map 4-189
Priority Commands (Layer 3 and 4) 4-190
This section describes commands used to configure Layer 3 and Layer 4 traffic
priority on the switch. 4-190
map ip port (Global Configuration) 4-190
map ip port (Interface Configuration) 4-191
map ip precedence (Global Configuration) 4-191
map ip precedence (Interface Configuration) 4-192
map ip dscp (Global Configuration) 4-193
map ip dscp (Interface Configuration) 4-193
show map ip port 4-194
show map ip precedence 4-195
show map ip dscp 4-196
Quality of Service Commands 4-197
class-map 4-198
match 4-199
policy-map 4-200
class 4-200
set 4-201
police 4-202
service-policy 4-203
show class-map 4-204
show policy-map 4-204
show policy-map interface 4-205
Multicast Filtering Commands 4-205
IGMP Snooping Commands 4-206
ip igmp snooping 4-206
ip igmp snooping vlan static 4-206
ip igmp snooping version 4-207
show ip igmp snooping 4-207
show mac-address-table multicast 4-208
IGMP Query Commands 4-209
ip igmp snooping querier 4-209
ip igmp snooping query-count 4-209
ip igmp snooping query-interval 4-210
ip igmp snooping query-max-response-time 4-211
ip igmp snooping router-port-expire-time 4-211
Static Multicast Routing Commands 4-212
ip igmp snooping vlan mrouter 4-212
show ip igmp snooping mrouter 4-213
Domain Name Service Commands 4-214
ip host 4-214
clear host 4-215