User`s guide

FX-16NW

[3] Config Vlan by Vid

You can select individual ports to form your own Vlan group.

Note:

To enable this option, you need to assign a nonzero group number to every

port.

In the following example, VLAN Group 2 is set up using Port 1, 3 and 5.

Type “3” at the [Your Select>] prompt and press Enter.

Next, type “1” at the [Vlan Port>] prompt to add Port 1 to VLAN. Press

Enter.

Then, type “2”at the [What Vid do you want to set?] prompt to set VLAN

group number 2 to Port 1. Press Enter to continue.

At this stage, the current VLAN configuration is displayed. The upper row

shows the individual port numbers, whereas the lower row indicates the

VLAN group numbers to which each port has been assigned. In this

example, Port 1 has been set to VLAN Group 2.

[1] set 2 Group port Vlan (1-8) (9-16)

Specifies Port 1 through 8 as VLAN Group 1, and sets Port 9 through 16 as

VLAN Group 2. Type “1” at the [Your select>] prompt and press Enter.

The current VLAN configuration is displayed. The upper row shows the

individual port numbers, whereas the lower row indicates the VLAN group

numbers to which each port has been assigned.

[2] Set 4 Group port Vlan (1-4) (5-8) (9-12) (13-16)

Specifies Port 1 through 4 as VLAN Group 1, Port 5 through 8 as VLAN

Group 2, Port 9 through 12 as VLAN Group 3, and Port 13 through 16 as

VLAN Group 4.

Type “2” at the [Your select>] prompt and press Enter. The current VLAN

configuration is displayed. The upper row shows the individual port

numbers, whereas the lower row indicates the VLAN group numbers to

which each port has been assigned.