User`s guide

33
FX-16NW
32
FX-16NW
[4] Port 1,5,2,6 four port trunking
Sets Ports 1, 5, 2 and 6 to a trunking port.
Type “4” at the [Your select>] prompt and press Enter. The current trunking
configuration is displayed.
[5] EXIT
Returns to the main menu.
Type “5” at the [Your select>] prompt and press Enter.
[6] Config Vlan Group Setting
Configures VLAN groups. By default, no VLAN group is configured.
Type “6” at the [Setup>] prompt in the main menu, and press Enter.
The following menu will be displayed.
3
7
Configuring the VLAN Group Settings
[1] No trunking
Clears all trunking port settings.
Type “1” at the [Your select>] prompt and press Enter. The current trunking
configuration is displayed.
[2] Port 1,5 trunking
Sets Port 1 and 5 to a trunking port.
Type “2” at the [Your select>] prompt and press Enter. The current trunking
configuration is displayed.
[3] Port 1,5 & Port 2,6 two group trunking
Sets two groups of ports, namely 1)Port 1 and 5 and 2)Port 2 and 6, to a
trunking port. Type “3” at the [Your select>] prompt and press Enter. The
current trunking configuration is displayed.