User`s guide

FX-16NW

[4] EXIT

Returns to the main menu.

Type “4” at the [Your select>] prompt and press Enter.

[5] Config Trunking Port Setting

Configures a given trunking port. By default, no trunking port is

configured.

Type “5” at the [Setup>] prompt in the main menu and press Enter. The

following menu will be displayed.

Configuring the Trunk Port Settings

[2] Set Sniffer Port

Specifies the destination port for the port you selected at the “Set Monitor

Port” prompt. Data is copied to this port. A LAN analyzer such as Sniffer

is attached to this port to study traffic.

Type “2” at the [Your select>] prompt and press Enter. Then, enter a

desired port number at the [New Sniffer Port] prompt and press Enter. The

terminal application will display the Sniffer port and Monitor port you just

configured.

[3] Clear All Setting

Clears all the monitor port and Sniffer port settings.

Type “3” at the [Your select>] prompt and press Enter.