System information

2-22
Configuring the Switch
2
CLI – Use the following command to display version information.
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display the current
connection status, including link state, speed/duplex mode, flow control, and
auto-negotiation.
Command Attributes (Web)
• Name – Interface label.
• Type – Indicates the port type (10BASE-T, 100BASE-TX, 100BASE-FX,
1000BASE-SX, 1000BASE-LX, 1000BASE-GBIC or 1000Base-SFP).
• Admin Status
– Shows if the interface is enabled or disabled.
• Oper Status
– Indicates if the link is Up or Down.
• Speed Duplex Status – Shows the current speed and duplex mode.
(Auto, or fixed choice)
• Flow Control Status – Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or None)
• Autonegotiation – Shows if auto-negotiation is enabled or disabled.
• Trunk Member – Shows if port is a trunk member. (Port Information only.)
• Creation – Shows if a trunk is manually configured. (Trunk Information only.).
Console#show version 3-35
Unit1
Serial number :A224029499
Service tag :
Hardware version :R0A
Module A type :not present
Module B type :not present
Number of ports :24
Main power status :up
Redundant power status :not present
Agent(master)
Unit id :1
Loader version :0.0.6.5
Boot rom version :1.0.1.4
Operation code version :0.1.2.1
Console#