System information

2-18
Configuring the Switch
2
Copying the Running Configuration to a File
You can copy the running configuration to a file.
Figure 2-11. Copying the Running Config to File
CLI – If you copy the running configuration to a file, you can set this file as the
startup file at a later time, and then restart the switch.
Resetting the System
Web – Select System, Reset to reboot the switch. When prompted, confirm that you
want reset the switch.
Figure 2-12. Resetting the System
CLI – Use the reload command to reboot the system.
Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that support Multicast
Filtering, Traffic Classes, and Virtual LANs. You can access these extensions to
display default settings for the key variables, or to configure the global setting for
GARP VLAN Registration Protocol (GVRP).
Console#copy running-config file 3-15
destination file name : 051902.cfg
/
Console#
Console#config
Console(config)#boot system config: 051902.cfg 3-19
Console(config)#exit
Console#reload 3-12
Console#reload 3-12
System will be restarted, continue <y/n>? y