System information

2-17
Security
2
Web – Click System, Configuration. Enter the IP address of the TFTP server, enter
the name of the file to download, select a file on the switch to overwrite or specify a
new file name, and then click
Transfer from Server.
Figure 2-9. Downloading Configuration Settings
Setting the Startup Configuration File
If you download to a new file name, then select the new file from the drop-down box
for Startup Configuration File, and press Apply Changes. To use the new settings,
reboot the system via the System/Reset menu.
Figure 2-10. Setting the Start-Up File
CLI – Enter the IP address of the TFTP server, specify the source file on the server,
set the startup file name on the switch, and then restart the switch.
Console#copy tftp startup-config 3-15
TFTP server ip address: 192.168.1.19
Source configuration file name: startup2.0
Startup configuration file name [startup] : startup2.0
/
Console#
Console#config
Console(config)#boot system config: startup2.0 3-19
Console(config)#exit
Console#reload