System information

2-7
Basic Configuration
2
Web – Click System, System Information. Specify the system name, location, and
contact information for the system administrator, then click Apply. (This page also
includes
a Telnet button that allows you to access the Command Line Interface via
Telnet.)
Figure 2-3. Displaying System Information
CLI – Specify the hostname, location and contact information.
Console(config)#hostname FMS-24K 3-20
Console(config)#snmp-server location TPS - 3rd Floor 3-37
Console(config)#snmp-server contact Geoff 3-37
Console#show system 3-33
System description: FMS-24K Layer2 Stackable Intelligent Switch
System OID string: 1.3.6.1.4.1.202.20.24
System information
System Up time: 0 days, 2 hours, 4 minutes, and 7.13 seconds
System Name : FMS-24K
System Location : TPS - 3rd Floor
System Contact : Geoff
MAC address : 00-30-f1-47-58-3a
Web server : enable
Web server port : 80
POST result :
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test...........PASS
------------------- DONE --------------------
Console#