System information

2-6
Configuring the Switch
2
Basic Configuration
Displaying System Information
You can easily identify the system by providing a descriptive name, location and
contact information.
Command Attributes
• System Name – Name assigned to the switch system.
• Object ID – MIB II object ID for switch’s network management subsystem.
• Location – Specifies the system location.
• Contact – Administrator responsible for the system.
• System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
• MAC Address – The physical layer address for this switch.
• Web server – Shows if management access via HTTP is enabled.
• Web server port – Shows the TCP port number used by the web interface.
• POST result – Shows results of the power-on self-test.
dot1X Information Displays general port authentication status information 2-93
dot1X Configuration Enables the changing of general port authentication features 2-95
dot1X Port Configuration Enables the changing of port authentication features 2-96
dot1X Statistics Displays a per-port statistical readout 2-97
Table 2-2. Main Menu
Menu Description Page