System information

A-3
For example, the following screen text shows the download procedure for a
runtime code file:
12. To set the new downloaded file as the startup file, use the [S]et Startup File
menu option.
13. When you have finished downloading code files, use the [C]hange Baudrate
menu option to change the baud rate of the switch’s serial connection back to
9600 baud.
14. Set your PC’s terminal emulation software baud rate back to 9600 baud. Press
<Enter> to reset communications with the switch.
15. Press <q> to quit the firmware-download mode and boot the switch.
Select>x
Xmodem Receiving Start ::
[R]untime
[D]iagnostic
[L]oader
Update Image File:r
Runtime Image Filename : run_1013
Updating file system.
File system updated.
[Press any key to continue]