System information

3-114
Command Line Interface
3
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
CoS assigned at the ingress port is used to select a CoS priority at the egress
port.
Example
The following example shows how to map CoS values 0, 1 and 2 to priority queue 0,
value 3 to queue 1, values 4 and 5 to queue 2, and values 6 and 7 to queue 3:
Related Commands
show queue cos-map (3-114)
show queue bandwidth
Use this command to display the weighted round-robin (WRR) bandwidth allocation
for the priority queues.
Default Setting
None
Command Mode
Privileged Exec
Example
show queue cos-map
Use this command to show the class of service priority map.
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map 0 1 2
Console(config-if)#queue cos-map 1 0 3
Console(config-if)#queue cos-map 2 4 5
Console(config-if)#queue cos-map 3 6 7
Console(config-if)#
Console#show queue bandwidth
Queue ID Weight
-------- ------
0 1
1 4
2 16
3 64
Console#