System information

3-100
Command Line Interface
3
Command Mode
Normal Exec, Privileged Exec
Example
Related Commands
garp timer (3-98)
bridge-ext gvrp
Use this command to enable GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN information in order to
register VLAN members on ports across the network. This function should be
enabled to permit automatic VLAN registration, and to support VLANs which
extend beyond the local switch.
Example
show bridge-ext
Use this command to show the configuration for bridge extension commands.
Default Setting
None
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 20 centiseconds
Leave timer: 60 centiseconds
Leaveall timer: 1000 centiseconds
Console#
Console(config)#bridge-ext gvrp
Console(config)#