System information

3-83
VLAN Commands
3
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network, but
communicate as though they belong to the same physical segment. This section
describes commands used to create VLAN groups, add port members, specify how
VLAN tagging is used, and enable automatic VLAN registration for the selected
interface.
Editing VLAN Groups
vlan database
Use this command to enter VLAN database mode. All commands in this mode will
take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Table 3-24. VLANs
Command Groups Function Page
Editing VLAN Groups Sets up VLAN groups, including name, VID and state 3-83
Configuring VLAN
Interfaces
Configures VLAN interface parameters, including ingress and egress
tagging mode, ingress filtering, PVID, and GVRP
3-85
Displaying VLAN
Information
Displays VLAN groups, status, port members, and MAC addresses 3-91
Configuring Private VLANs Configures private VLANs, including uplink and downlink ports 4-150
Table 3-25. Editing VLAN Groups
Command Function Mode Page
vlan database Enters VLAN database mode to add, change, and delete
VLANs
GC 3-83
vlan Configures a VLAN, including VID, name and state VC 3-84