System information

3-55
Interface Commands
3
Command Mode
Normal Exec, Privileged Exec
Example
To show all lines, enter this command:
Interface Commands
These commands are used to display or set communication parameters for an
Ethernet port, aggregated link, or VLAN.
Console#show line
Console configuration:
Password threshold: 3 times
Interactive timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Vty configuration:
Password threshold: 3 times
Interactive timeout: 65535
Console#
Command Function Mode Page
interface Configures an interface type and enters interface configuration
mode
GC 3-56
description Adds a description to an interface configuration IC 3-56
speed-duplex Configures the speed and duplex operation of a given interface
when autonegotiation is disabled
IC 3-57
negotiation Enables autonegotiation of a given interface IC 3-58
capabilities Advertises the capabilities of a given interface for use in
autonegotiation
IC 3-59
flowcontrol Enables flow control on a given interface IC 3-60
clear counters Clears the statistics on a given interface PE 3-61
shutdown Disables an interface IC 3-61
switchport broadcast
packet-rate
Configures broadcast storm threshold IC 3-62
show interfaces status Displays status for the specified interface NE, PE 3-63
show interfaces
counters
Displays statistics for the specified interfaces NE, PE 3-64
show interfaces
switchport
Displays the administrative and operational status of an interface NE, PE 3-65