System information

3-34
Command Line Interface
3
Command Usage
• For a description of the items shown by this command, refer to “Displaying
System Information” on page 2-6.
• The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.
Example
show users
Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The session used to execute this command is indicated by a “*” symbol next to
the Line (i.e., session) index number.
Console#show system
System description: FMS-24K
System OID string: 1.3.6.1.4.1.259.6.10.45
System information
System Up time: 0 days, 1 hours, 1 minutes, and 1.93 seconds
System Name : [NONE]
System Location : [NONE]
System Contact : [NONE]
MAC address : 00-30-F1-6E-0D-E0
Web server : enable
Web server port : 80
POST result
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test...........PASS
------------------- DONE --------------------
Console#