System information

3-20
Command Line Interface
3
Command Usage
• A colon (:) is required after the specified file type.
• If the file contains an error, it cannot be set as the default file.
Example
Related Commands
dir (3-18)
whichboot (3-19)
System Management Commands
These commands are used to control system logs, passwords, user names, browser
configuration options, and display or configure a variety of other system information.
Device Designation Commands
hostname
Use this command to specify or modify the host name for this device. Use the no
form to restore the default host name.
Console(config)#boot system config: startup
Console(config)#
Table 3-8. System Management Commands
Command Group Function Page
Device Designation Configures information that uniquely identifies this switch 3-20
User Access Configures the basic user names and passwords for management access 3-21
Time (System Clock) Sets the system clock automatically via NTP/SNTP server or manually 3-23
Web Server Enables management access via a Web browser 3-25
Event Logging Controls logging of error messages 3-26
System Status Displays system configuration, active managers, and version information 3-29
Table 3-9. Device Designation Commands
Command Function Mode Page
hostname Specifies the host name for the switch GC 3-20
snmp-server contact Sets the system contact string GC 3-37
snmp-server location Sets the system location string GC 3-37