System information

2-97
Configuring 802.1x Port Authentication
2
• Authorized –
- Yes – Connected client is authorized.
- No – Connected client is not authorized.
- Blank – Displays nothing when dot1x is disabled on a port.
• Supplicant – Indicates the MAC address of a connected client.
• Trunk – Indicates if the port is configured as a trunk port.
Web - Select 802.1X, 802.1X Port Configuration.
Figure 2-62. 802.1x Port Configuration
CLI - In Interface mode type dot1x port-control auto, or use the no form to disable.
Displaying 802.1x Statistics
This switch can display statistics for dot1x protocol exchanges for any port.
Statistical Values
Console(config)#interface ethernet 1/2
Console(config-if)#dot1x port-control auto 3-138
Console(config-if)#
Table 2-8. 802.1x Statistics
Parameter Description
Rx EXPOL Start The number of EAPOL Start frames that have been received by this
Authenticator.
Rx EAPOL Logoff The number of EAPOL Logoff frames that have been received by this
Authenticator.
Rx EAPOL Invalid The number of EAPOL frames that have been received by this
Authenticator in which the frame type is not recognized.
Rx EAPOL Total The number of valid EAPOL frames of any type that have been received
by this Authenticator.
Rx EAP Resp/Id The number of EAP Resp/Id frames that have been received by this
Authenticator.