User's Manual

http://www.sapido.com.tw 100

USER MANUA

V1.0

under the IP Config Menu. For more information, please refer to Router Mode or AP

Mode.

4. Q: How do I upgrade the firmware of PCI022_MZK-KR150NUS Broadband Router?

A: Periodically, a new Flash Code is available for PCI022_MZK-KR150NUS Broadband

Router on your product supplier’s website. Ideally, you should update

PCI022_MZK-KR150NUS Broadband Router’s Flash Code using Upgrade

Firmware on the System Management menu of PCI022_MZK-KR150NUS

Broadband Router Settings.

5. Q: My PCI022_MZK-KR150NUS Broadband Router cannot connect to the ISP?

A: There are three possible solutions.

1. Check the Cable/XDSL modem is power on.

2. Check the Cable/XDSL link light is on to verify a good physical connection.

3. Check the WAN port LED to verify if the Cable/XDSL modem is connected to the

router:

If your ISP Login method is following, please make sure the username and password

are correct or not.

If your ISP is using dynamic IP addressing (DHCP) then the DHCP protocol does not

have the authentication feature. Some Cable service providers often use the following

to determine user’s identification.

6. Q: Why is that I can ping to outside hosts, but cannot access Internet websites?

A: Check the DNS server settings on your PC. You should get the DNS servers settings

from your ISP. If your PC is running a DHCP client, remove any DNS IP address

setting. As the router assign the DNS settings to the DHCP-client-enabled PC.

7. Q: PCI022_MZK-KR150NUS Broadband Router couldn’t save the setting after click

on Apply button?

A: PCI022_MZK-KR150NUS Broadband Router will start to run after the setting finished

applying, but the setting isn’t written into memory. Here we suggest if you want to

make sure the setting would be written into memory, please reboot the device via

Reboot under System Management directory.