User's Manual

Bluetooth Stereo Headset
User Manual
BS-720-T
Specification of the Headset
Bluetooth Standard
Talk time
play time
Standby time
Charging time
Supported Bluetooth profiles
Operating temperature range
Storage temperature
Operation range
Power Supply
Over 5 .
Over 4 .
Over 7 day
Within 90~120 Mins.
10 meters(open space)
A2DP/AVRCP/Handsfree / Headset .
Bluetooth V2.1
hrs
hrs
s.
0 ~ 55 'C
0% ~ 90% (non-concrete status)
5V DC, 00~240V AC adapter
2. Introduction of the product
Power
Earphone Jack / Charging Port.
Earphone
LED
MFB
(Multi-
Function
Button)
Mic
-Next track
-Volume up
Touch
panel
-Previous track
-Volume down
1. Charging the Headset
When charging, turn off the headset first.
At least for 4 hours when first time charging.
When charging, the red light on.
ully charged the red light will be off.F
AC Adapter
(optional)
off
USB cable
5. Pairing with your mobile phone
It need to pair with your Bluetooth device, first time.
4. "BS-720” will show on certain items in your mobile phone.
5. Key in pairing pin code "0000”press " yes" , the indicator
light will turn from the blue/red flashing status into blue
flashing, it means the pairing has been successful.
6.Now the headset has been in the "connected mode".
you may using your headset now.
10cm~1m
The pairing
distance
Devices found
BS-720
1.Turn on the headset.
2.Press the MFB key for at least
7 sec; the blue and red light
flashing alternately it means the
headset is in the “pairing mode".
3.Please ensure that your mobile
phone is provided the Bluetooth
Function, and activate the function.
(detail please check up with your
mobile phone user's manual.)
- Stand-by mode--
blue light flash once every 5 Sec.
- C
blue light flash twice every 5 Sec.
- Active call mode--
blue light flash three times every 5 Sec.
- Playing music–
blue light fade out every 5 Sec.
- low battery--
red light flash.
onnected mode--
light indicator
light indicator
Blue Red
"0000”
on
off
Press 7sec
on
3. How to wear the headset
20~25cm
Mic
Operation range
10 meters(open space)
7. Make a call.
To make a call, dial through your mobile phone.
8. Answer a call when listening music.
When a call comes in, you will hear the ring tone from the
earphone. music will pause automatically.. Tap the touch panel .
9. End a call.
When you finish a call; double tap the touch panel.
You can also wait until the other finishes the call .
music will
resume automatically ..
Double-Tap
Ringing....
Tap
1.Plug the earphone into the headset.
2.Put the earphone in your ear.
3.Clip the headset on your clothes.
4.Keep 20~25cm from Mic to jaw for the best result.
785 .
Microphone
toward jaw
Mic
4. Turn on/ Turn off
1.Turn on - blue light flashing.
2.Turn off - red light flashing then off.
6. Listening to music.
Your mobile phone need supports A2DP and AVRCP Profile.
(Some phones may require you to start a media play first.)
Stop the music.
When you listen music
...Click the MFB.
Click
Play the music.
The headset should be
under "Connected mode".
...Click the MFB.
Click
Click Click Click
Press
continuously.
Press
continuously.
Press
continuously.
Next or previous track.
When you listen music
...press the “+” or “-”.
Adjusting volume.
When you listen music
...Click the “+” or “-”.
Answer a second call . end current call and answer the
incoming call. .. Tap the touch panel .