User's Manual

MZK-WG300FF14
Band – allows you to select the 802.11 standards that will be allowed to
connect to the wireless router
SSID – (service set identifier) allows you to enter a unique name for the
wireless LAN. It is recommended to change the default SSID for
better security.
6. The Wireless Security Setup page will be displayed. Select the encryption type to prevent
any unauthorized access to your wireless network. Click “Finish”.
NOTE: The Wireless Security Settings can also be configured with customized settings in
Wireless -> Security.
Encryption – choose your preferred encryption type
7. The Internet access setup is complete. Your router may reboot at this point.
NOTE: If your PC/host system is still cannot get internet access, please reboot your
DSL/cable modem. Contact also your ISP for trouble shooting.
If wireless stations will connect to the router, the wireless stations must use the
same settings, such as SSID, encryption type, etc.
Quick Installation Guide
7