Datasheet

POE-TESTER
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2013 PLANET Technology Corp. All rights reserved.
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City
231, Taiwan (R.O.C.)
Tel: [phone] Fax: [phone]
Email: [e-mail] www.planet.com.tw
PLANET Technology Corporation
POE-TESTER
2
PoE Installation Troubleshooting
Although PDs that implement only Mode A with end-span or Mode B with mid-span are disallowed by the IEEE 802.3af/at standard, there are still some
of the PDs that are designed to work with only one of the modes. Thus, it will cause the PoE PSE and PD not to be compatible with each other in the
applications. For example, an end-span designed PoE switch cannot power on the remote mid-span only wireless access point. But most of the time, the
installers would not exactly know what the remote PSE devices are. PLANET POE-TESTER checks your UTP cable for power and identies its source, mid-
span or end-span. Make sure at the end of UTP cable there is existence of PoE, and then the next step is to check if the PD is compatible with the PSE, or
it is a malfunctioned PD.
Applications
With compact size and congure free design, the POE-TESTER is truly the best handy PoE test tool for the installation of PD device to test if IEEE 802.3af/
at PoE power is sent to wireless access points, IP surveillance cameras, VoIP phones and other PoE devices. It offers plug-and-play PoE diagnostic and PoE
installation for installers and system integrators.
Identify Your Power over Ethernet Mode
POE-TESTER
End-Span
PoE Switch
Mid-Span
PoE Injector
End-Span+Mid-Span
60W Ultra PoE
LED Indicator
PoE Power Source Equipment
Specications
Ordering Information
POE-TESTER IEEE 802.3af/at Power over Ethernet Tester
Model
POE-TESTER
Hardware Specications
Interface

1 x RJ-45 TP connectors
–
PoE Power Input (PD)
LED indicators

End-span / Pin 1236 (Green)
–
The PoE voltage is detected on pair 1,2,3,6

Mid-span / Pin 4578 (Orange)
–
The PoE voltage is detected on pair 4,5,7,8
Power input IEEE 802.3at/af compliant with voltage within 40~57V
Dimensions (W x D x H) 23 x 70.1 x 22 mm
Weight 20g
Cabling UTP: Cat. 5 UTP cable or above, 100m maximum
Environments
Temperature -10 ~ 60 degrees C (operating)
Humidity 5 ~ 95% (non-condensing)
Standards Compliance
Standard
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Emission CE Compliance