Datasheet

ManualsBrandsPlanet ManualsMiscellaneous Test AccessoriesPoE Tester - PD Device

Data Sheet

Key Features

POE-TESTER

IEEE 802.3af/at Power over Ethernet Tester

Quick and easy test on RJ-45 outlet for Power over Ethernet existence in a second

PLANET POE-TESTER is an easy-to-use PoE diagnostic adapter for network installers,

company MIS and even home users to quickly identify the existence of Power over

Ethernet on applications network. It is designed to detect if the IEEE 802.3af/at

PoE voltage runs over the UTP cable and identify the type of PSE (Power Source

Equipment) for troubleshooting.

Plug and Show LED Indicators

Simply connect the POE-TESTER to the PSE or the RJ-45 outlet and the LED will light up when it detects the PoE voltage via the UTP cable and identies

the PSE to be mid-span, end-span, or even the latest 4-pair 60-watt ultra PoE in a second.

• Quickly tests RJ-45 outlet for Power over Ethernet

existence

• Two LEDs indicate the types of PSE

(power source equipment)

• Compliant with IEEE 802.3at/af Po E standard

• Compact size, Plug and Play design

• End-span PoE switch

• Mid-span PoE injector / injector hub

• 4-pair, 60-watt ultra PoE injector

Identify PoE PSE Modes

The POE-TESTER provides two LEDs for quick and easy PSE mode identification. A Power over Ethernet system comprises a PSE (Power Sourcing

Equipment) and a PD (Powered Device). The PSE is a device that will provide power in a PoE setup. There are two types of PSE, Mode A and Mode B.

The PSE may either be a Mode A, end-span PoE switch or a Mode B, mid-span PoE injector.

PoE PSE Modes UTP Power Pin Assignment PSE Devices

Mode A / End-span Pin 1,2,3,6 PoE Switch

Mode B / Mid-span Pin 4,5,7,8

PoE Single-port Injector

PoE Multi-port Injector Hub

The PD is a PoE-enabled terminal by PSE and thus consumes energy, such as IP network cameras, VoIP phones and wireless access points and more.

No PoE Detected

Mid-span 802.3af/at

PoE Injector / Injector Hub

End-span 802.3af/at

PoE Switch

4-pair 60-watt

PoE Injector

Midspan Endspan

Pin Pin

4 5 1 2

7 8 3 6

Midspan Endspan

Pin Pin

4 5 1 2

7 8 3 6

Midspan Endspan

Pin Pin

4 5 1 2

7 8 3 6

Midspan Endspan

Pin Pin

4 5 1 2

7 8 3 6

Summary of content (2 pages)

PAGE 1
POE-TESTER IEEE 802.3af/at Power over Ethernet Tester Key Features • Quickly tests RJ-45 outlet for Power over Ethernet existence • Two LEDs indicate the types of PSE (power source equipment) • End-span PoE switch • Mid-span PoE injector / injector hub • 4-pair, 60-watt ultra PoE injector • Compliant with IEEE 802.
PAGE 2
POE-TESTER PoE Installation Troubleshooting Although PDs that implement only Mode A with end-span or Mode B with mid-span are disallowed by the IEEE 802.3af/at standard, there are still some of the PDs that are designed to work with only one of the modes. Thus, it will cause the PoE PSE and PD not to be compatible with each other in the applications. For example, an end-span designed PoE switch cannot power on the remote mid-span only wireless access point.