Datasheet

ManualsBrandsPlanet ManualsAutomationPoE Splitter, 1Gbps, RJ45 Ports 2, PoE Ports 1

POE-162S

Nowadays, PLANET has released next generation of Power over Ethernet Splitter product

– POE-162S, compliant with brand-new IEEE 802.3at High Power over Ethernet

standard that support 25.5 Watts for maximum input power of per device. The POE-162S

provides the following key features:



IEEE 802.3at Power over Ethernet Standard Compliant



12V / 24V DC Power Output Through DIP Switch



Passive 10/100/1000Mbps Duplex Mode Support



Quick and Easy High Power PoE Network Deployment

The POE-162S is an IEEE 802.3at High Power over Ethernet Splitter that can

split the 52 ~ 56V DC over the Ethernet cable into selectable 12V or 24V DC

power output. It is designed specifically to fill the growing demand of higher

power required network equipments such as PTZ (Pan, Tilt & Zoom) network

cameras, PTZ Speed Dome camera, color touch- screen / Video and Voice over IP

(VoIP) telephones, multi- channel (11a / b / g / n) wireless LAN access points and

other network devices that need to work normally by higher power feeding than

power via current IEEE 802.3af PoE standard. The POE-162S High Power Splitter

is an ideal solution to transfer power to the network device with high power

demand directly via the RJ-45 Port interface without the need to install power

outlets and electrical cabling.

Quick and Easy High Power PoE Network Deployment

The POE-162S (Splitter) can work with the IEEE 802.3at Gigabit Power over Ethernet devices like POE-161, High Power PoE Switch and Media Converter

(Injector, insert DC Voltage into Cat.5/5e/6 cable) to transfer data and power simultaneously into the end device. The POE-161, High Power Switch and Media

Converter can combine the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3at Gigabit Power over Ethernet Injector; and the POE-

162S shall separate the digital data and the power into 12V / 24V DC power outputs. The maximum distance between the high power PoE injector and the

splitter (POE-162S) is 100 meters. Unlike current Power over Ethernet Splitter, the POE-162S also supports passive 10/100/1000Mbps Ethernet connection ability.

Data Sheet

IEEE 802.3at Gigabit High Power over Ethernet Splitter

PTZ

Speed Dome

Power

Data

PoE

Power Line (DC)

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Summary of content (4 pages)

PAGE 1
POE-162S IEEE 802.3at Gigabit High Power over Ethernet Splitter Nowadays, PLANET has released next generation of Power over Ethernet Splitter product – POE-162S, compliant with brand-new IEEE 802.3at High Power over Ethernet standard that support 25.5 Watts for maximum input power of per device. The POE-162S provides the following key features:  IEEE 802.
PAGE 2
POE-162S With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, to connect through the high power PoE injector and the POE-162S, you could also have benefits including cost saving, easier for networking planning and higher reliability. Upon IEEE 802.
PAGE 3
POE-162S Applications The IEEE 802.3at Injector and Splitter Installation Due to the capability of IEEE 802.3at standard, the POE-162S can co-work with the IEEE 802.3at Gigabit PoE injector devices like POE-161, High Power Switch or High Power Media Converter and transform non-PoE equipment to IEEE 802.3at PoE application.
PAGE 4
POE-162S Specification Product IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-Span) Model Hardware Specification “PoE (Power + Data)” Input Port Interface “Data” Output Port DC Out Plug Connector LED Indicator POE-162S Network Cable Data Rate DIP Switch Power Input Power over Ethernet PoE Standard Number of client device can be powered Power Output DC Plug connectors (Diameter) 1 x RJ-45 STP 1 x RJ-45 STP 1 System: PoE In x 1 (Green) 10Base-T: 2-Pair UTP Cat.