User`s manual

3.2 Access NVR with its default IP

ur .20”.

is no DHCP server presented in the

to u e PC

r CAT.

address

ed static IP address “192.168.0The NVR comes with a pre-config

and PC

However, it is only used when there

network. Connect the NVR

directly to the NVR using a crosso

yo r switch or hub, or connect th

5 Ethernet cable.

The PC that is connected directly to the NVR (or within the same local area

network) should receiv from your web

wse s.

e an IP from it. Simply access the NVR

bro r with NVR default IP addres

You sh

ould be prompted for the user name and password. Enter its default

username “admin” and password “admin” and then click” OK” to enter the

system.