User`s manual

3. Connect to the NVR

There the

the NVR

by using

ou are

If rk where a

DHCP serv ch” utility from

the

are various ways you can connect to the NVR and below are

suggested methods for different network setup:

The NVR is placed in a network with a DHCP server: Connect to

“Device Search” Utility.

The NVR is placed in a network without DHCP server (or y

connecting to it directly): Access NVR with its default IP (192.168.0.20).

3.1 Use Device Search Utility

the NVR is placed in a corporate network or a local area netwo

er is already presented, please install the “Device Sear

bundled CD disk.

o begin, launch the “Device Search” utility from the CD and proceed with the

installation.