Datasheet
MGSW-24160F
AC and DC Redundant Power to Ensure Continuous Operation
The MGSW-24160F is equipped with one 100~240V AC power supply unit and one additional 36~72V DC power supply unit for redundant power supply
installation. A redundant power system is also provided to enhance the reliability with either AC or DC power supply unit. Redundant Power Systems are
specifically designed to handle the demands of high tech facilities requiring the highest power integrity. Furthermore, with the 36~72V DC power supply
implemented, the MGSW-24160F can be applied as the telecom level device.
Digital Input and Digital Output for External Alarm
The MGSW-24160F helps the network administrators efficiently manage the unexpected network situations by providing Digital Input and Digital Output for
external alarm device on the front panel. The Digital Input can be used to detect and log the status of the external devices such as door intrusion detector. The
Digital Output could be used to send alarm whenever the MGSW-24160F has port link down or power failure.
Cost-effective IPv6 Managed Gigabit Switch Solution
Nowadays, the need of IP Address increases owing to lots of electronic products or mobile devices able to access to the Internet. However, the current IPv4
network infrastructure is not capable enough to provide IP Address to each single users/Clients. The situation forces the ISP to build up the IPv6 (Internet
Protocol version 6) network infrastructure speedily. To fulfill the demand, the MGSW-24160F supports both IPv4 and IPv6 management functions. It can work
with both original IPv4 network structure and the new network structure (IPv6) in the future. With friendly management interface and plenty of management
functions included, the MGSW-24160F Managed Gigabit Switch is the best choice for you to build the IPv6 FTTx edge service and for Industrial Ethernet
applications to connect with IPv6 network.
Multiple SFP Fiber Port Switch for Growing Long-Reach Networking of
Enterprise, Telecoms and Campus
The MGSW-24160F is implemented with advanced management functions, and
provides 16 100/1000Mbps dual speed SFP Fiber ports and 8 10/100/1000Mbps TP
ports delivered in a rugged strong case. It is capable of providing non-blocking switch
fabric and wire-speed throughput as high as 48 Gbps in the temperature range from
-10 to 60 Degree C without any packet loss and CRC error, which greatly simplifies
the tasks of upgrading the enterprise LAN for catering to increasing bandwidth
demands. The MGSW-24160F is specially designed for service provider to deliver
profitable Ethernet network. Furthermore, it adopts “Front Access” design for easy
technician wiring and maintenance of the MGSW-24160F in the cabinet.
Data Sheet
1
16-Port 100/1000Base-X SFP + 8-Port 10/100/1000Base-T
L2/L4 Managed Metro Ethernet Switch
AC Power Input
and Switch
Grounding
DC Power Switch
2 x DC Power Inputs
System / Port L.E.D.
2 x DI / DO
8 x 10/100/1000Base-T, RJ-45
Reset Button
16 x 100/1000Base-X SFP slot
RS-232 Console








