Datasheet

ISW-621T / ISW-621TS15
2
Applications
Industrial Switch for High Performance Data Collection and Forwarding
The ISW-621T and ISW-621TS15 are equipped with four 10/100Mbps ports offering auto MDI / MDIX feature, and two 100Base-FX optic-ber SC interfaces
providing 1.2Gps non-blocking switch fabric and the 2K MAC address table so that they can perform wire-speed packets transfer without risk of packet loss.
The ISW-621T / ISW-621TS15, which come in the slim type IP30 metal case, is ideal for the most Heavy Industrial demanding environments.
Steel Factory
IP Camera
IP Camera
Fiber
Switch
IP Camera IP Camera
IP Camera
IP Camera
Weather Station
Winter Season of Country
ISW-621TS15
ISW-621TS15
ISW-621TS15
ISW-621TS15
ISW-621TS15
15km
15km
15km
15km
15km
15km
15km
15km
ISW-621TS15
Desert
Data Center
100Base-FX Fiber-optic
100
100Base-TX UTP
100
100100
100
100
100
100
100
Specications
Model
ISW-621T / ISW-621TS15
Hardware Specications
Copper Interface
Ports 4 x 10/100Base-TX, auto negotiation, auto-MDI / MDI-X
Cable
10Base-T : 2-pair UTP Cat. 3, 4, 5 cable (100 meters, max.)
100Base-TX : 2-pair UTP Cat. 5 cable (100 meters, max.)
Optical Interface
Port 2 x 100Base-FX
Cable
ISW-621T: 50/125μm / 62.5/125μm ber
ISW-621TS15: 9/125μm ber
Mode
ISW-621T: Multi-mode
ISW-621TS15: Single-mode
Distance
ISW-621T: 2km
ISW- 621TS15: 15km
Wavelength
ISW-621T: 1310nm
ISW-621TS15: 1310nm
Launch Power
ISW-621T: Max. -14dBm, Min. -20dBm
ISW-621TS15: Max. 0dBm, Min. -20dBm
Receive Sensitivity
ISW-621T: -32dBm
ISW-621TS15: -32dBm
Max. Input Power
ISW-621T: -14dBm
ISW-621TS15: 0dBm
Dimensions (W x D x H) 135 x 97 x 32 mm
Weight 442g
Power Requirements
12~48V DC
Redundant power with polarity reverse protection function
Power Consumption / Dissipation Max. 16 watts / 54 BTU
Installation DIN rail kit and wall mount ear
Alarm
12~48V DC
Redundant power with polarity reverse protection function
Switch Specications
Switch Processing Scheme
Store-and-Forward
Address Table 2K entries
Buffer 1Mbit
Flow Control
Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V