Datasheet

ManualsBrandsPlanet ManualsAutomationEthernet Switch, RJ45 Ports 4, Fibre Ports 2SC, 100Mbps, Layer 2 Unmanaged

Data Sheet

ISW-621T / ISW-621TS15

4-Port 10/100Base-TX + 2-Port 100Base-FX Industrial

Ethernet Switch with Wide Operating Temperature

(-40~75 degrees C)

Highly Convenient and Feasible Industrial Robust Switch

PLANET has upgraded two models named ISW-621T and ISW-621TS15 for use in

environments with wide operating temperature. The capital ‘T’ (ISW-621T and ISW-

621TS15) shown in the model names means that they can support and operate under

WIDE-TEMPERATURE environment ranging from -40 up to 75 degrees C. As we know

the temperature in many places and countries of the world are lower than -10 degrees

C, these two new models, ISW-621T and ISW-621TS15, will be the right products

for Transportation, Manufacturing, Security and Surveillance network deployments in

those harsh environments. The ISW-621T / ISW-621TS15 also provides a high level of

immunity against electromagnetic interference and heavy electrical surges which are

usually found on plant oors or in curb side trafc control cabinets.

Flexibly Extendable Distance

They (the ISW-621T and ISW-621TS15) each include four 10/100Base-TX auto-

negotiation ports and two 100Base-FX ports. The ISW-621T is equipped with 100Base-

FX multi-mode SC interfaces for transmission distance up to 2km while the ISW-

621TS15 is equipped with 100Base-FX single-mode SC interfaces for transmission

distance up to 15km. The two 100Base-FX ports provide more flexibility for

Transportation, Manufacturing, Security and Surveillance with distance extension without

any limitation, making the ISW-621T / ISW-621TS15 suitable either for long distance

(ISW-621TS15) or short distance (ISW-621T) network deployment.

Easy Installation and Wide Range of Power Usages

The ISW-621T and ISW-621TS15 are designed with a compact case that allows either

DIN rail or panel mounting for the efficient usage of cabinet space. It provides an

integrated power supply with a wide range of voltages for worldwide operation. It also

offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for

high availability applications requiring dual or backup power inputs.

Physical Port

• 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function for

ISW-621T series

• 2-port 100Base-FX interface on ISW-621T for up to 2km

(multi-mode ber 62.5/125μm, 50/125µm) transmission

distance

• 2-port 100Base-FX interface on ISW-621TS15 for up to 15km

(single-mode ber 9/125µm) transmission distance

Layer 2 Features

• Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX,

100Base-FX Ethernet standard

• Supports auto negotiation and 10/100Mbps half / full duplex

mode for each copper port

• High performance Store and Forward architecture, broadcast

storm control, runt/CRC ltering eliminates erroneous packets

to optimize the network bandwidth

• Prevents packet loss with back pressure (half-duplex) and

IEEE 802.3x pause frame ow control (full-duplex)

• Backplane (Switching Fabric): 1.2Gbps

• Integrated address look-up engine, supporting 2K absolute

MAC addresses

• 1Mbit on-chip frame buffer

• Automatic address learning and address aging

• CSMA/CD Protocol

Industrial Case / Installation

• IP30 metal case / protection

• DIN rail and wall mount design

• 12 to 48V DC, redundant power with polarity reverse

protection and connective removable terminal block for master

and slave power

• Supports EFT protection 6KV DC for power line

• Supports 6KV DC Ethernet ESD protection

• -40 to 75 degrees C wide operating temperature

Summary of content (3 pages)

PAGE 1
ISW-621T / ISW-621TS15 4-Port 10/100Base-TX + 2-Port 100Base-FX Industrial Ethernet Switch with Wide Operating Temperature (-40~75 degrees C) Physical Port • 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function for ISW-621T series • 2-port 100Base-FX interface on ISW-621T for up to 2km (multi-mode fiber 62.5/125μm, 50/125µm) transmission distance • 2-port 100Base-FX interface on ISW-621TS15 for up to 15km (single-mode fiber 9/125µm) transmission distance Layer 2 Features • Complies with IEEE 802.
PAGE 2
ISW-621T / ISW-621TS15 Applications Industrial Switch for High Performance Data Collection and Forwarding The ISW-621T and ISW-621TS15 are equipped with four 10/100Mbps ports offering auto MDI / MDIX feature, and two 100Base-FX optic-fiber SC interfaces providing 1.2Gps non-blocking switch fabric and the 2K MAC address table so that they can perform wire-speed packets transfer without risk of packet loss.
PAGE 3
ISW-621T / ISW-621TS15 Switch Fabric Throughput (Packet Per Second) Standards Conformance 1.2Gbps 0.89Mpps @ 64Bytes IEEE 802.3 Ethernet, 10Base-T IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX IEEE 802.