Datasheet

ISW-514PSxx
4
Installation DIN Rail kit and Wall Mount ear
Alarm
One relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type End-Span
PoE Power Output Per Port 48V DC, 350mA . Max. 15.4 watts
Power Pin Assignment
1/2(+), 3/6(-)
Switch Specications
Switch Processing Scheme
Store-and-Forward
Switch Fabric 1Gbps
Throughput (packet per second) 0.74Mpps@64bytes
Address Table 1K entries
Maximum Frame Size 1536 Bytes
Pack Buffer 512k bits
Flow Control
Back pressure for half duplex
IEEE 802.3x Pause frame for full duplex
Network cables

10/100Base-TX:
–
4-Pair UTP Cat. 3, 4, 5, 5e, 6 (100meters, max.)
–
EIA/TIA-568 100-ohm STP (100meters, max.)

100Base-FX:
–
Multi-Mode optic ber 62.5/125μm or 50/125μm
–
Single-Mode optic ber 9/125μm
Layer 2 Function
Management
Web management, SNMP Trap
VLAN

Port-Based VLAN

IEEE 802.1Q Tag-based VLAN, Up to 16 VLAN groups
QoS
2 priority queues for three type of Class of Service
–
Port-based VLAN
–
IEEE 802.1p priority tag
–
TCP/IP header’s DSCP classier
Weighted Round Robin queue scheduling
Bandwidth Control Inbound Rate Limit and Outbound Trafc shaping
Storm Control Disable, 12.5%, 25%, 50%, 62.5% 4 levels
Security Supports 5 IP addresses that have permission to access the Switch
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (Free Fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Standard Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
Environment
Temperature
Operating: -10~60 degrees C
Storage: -40~85 degrees C
Humidity
Operating: 5~90%
Storage: 5~90% (non-condensing)