Datasheet

Data Sheet
1
ISW-504PS
1
5-Port 10/100Mbps with 4-Port PoE Industrial Web Smart
Ethernet Switch
IEEE 802.3af Power over Ethernet Industrial Switch
PLANET ISW-504PS, a Web management Industrial PoE Switch, is designed to
transmit power and data over single Ethernet cable to remote PoE capable devices and
performs intelligent PoE control, power usage monitoring and smart Layer 2 switching
management in industrial harsh environments. The ISW-504PS provides 5 10/100Mbps
copper ports with 4 IEEE 802.3af Power over Ethernet inject interfaces delivered in an
IP30 rugged strong case. Supporting up to 15.4-watt power per port for any remote
IEEE 802.3af powered device (PD) such as PoE IP cameras and PoE wireless LAN
access point, the ISW-504PS is an ideal solution to deploying surveillance system and
wireless service in climatically demanding wide temperature range (-10 to 60 degrees C)
environments.
IEEE 802.3af Power over Ethernet Industrial Switch
PoE feature is more often supported in the industrial Ethernet devices for efficient
operation in harsh environments. The ISW-504PS in-line power follows standard IEEE
802.3af and able to give power to 4 PoE compliant devices at the distance up to 100
meters through the 4-pair Cat 5 / 5e UTP wire. With Data and Power over Ethernet
from one unit, the ISW-504PS can reduce cables deployment and eliminates the need
for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire
that carries both data and power results in lowering the installation costs, simplifying
the installation effort and eliminating the need for electricians or extension cords.
Furthermore, as there is only 24V DC input in some industrial environments, the ISW-
504PS supports 24V DC or 48V DC dual voltages input and is able to provide more
wide-ranging industrial IEEE 802.3af PoE applications.
Physical Port
• 5-port 10/100Mbps RJ-45 with auto MDI/MDI-X function
• 4-port support 48V DC power to PoE Powered Device (Port-1
to Port-4)
IEEE 802.3af PoE
• Complies with IEEE 802.3af Power over Ethernet End-Span
PSE
• Up to 4 IEEE 802.3af devices powered
• Supports PoE Power up to 15.4 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
PoE Management
• Total PoE Power Budget Control
• Enable / Disable PoE Function on each port
• PoE port Power Feeding priority
• Power limit on PoE port
• PDClassicationDetection
Web Management
• Web interface for remote management
• Firmware upgrade through Web interface
• PlanetSmartDiscoveryutilityautomaticallyndsPlanet
devices on the network
• SNMPTrapforalarmnoticationofevents
• VLANandQoSconguration
Layer 2 Features
• Supports auto-negotiation and 10/100Mbps half / full duplex
and auto MDI/MDI-X
• High performance Store and Forward architecture, runt/CRC
lteringeliminateserroneouspacketstooptimizethenetwork
bandwidth
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• Automatic address learning and address aging
PoE
100Base-TX UTP with PoE
PoE IP Camera
UTP
Output
24V DC Input
802.3af PoE
PoE