Datasheet

Data Sheet
1
ISW-501T
1
5-Port 10/100Mbps Industrial Fast Ethernet
Switch with Wide Operating Temperature
Physical Port
• 5-Port 10/100Mbps RJ-45 with auto MDI / MDI-X function
Layer 2 Features
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX Ethernet standard
• Supports auto negotiation and 10/100Mbps half / full
duplex mode
• High performance Store and Forward architecture,
broadcaststormcontrol,runt/CRClteringeliminates
erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• Backplane (Switching Fabric): 1Gbps
• Integrated address look-up engine, supporting 2K
absolute MAC addresses
• Automatic address learning and address aging
• CSMA / CD Protocol
Industrial case / installation
• IP30 metal case
• DIN rail and wall mount design
• 12 to 48V DC, redundant power with polarity reverse
protect function and connective removable terminal block
for master and slave power
• Supports EFT protection 6000V DC for power line
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Free fall, shock, vibration industrial stability
Slim type with more practicability and convenience
After PLANET ISW/IFT Fast Ethernet Switch/Converter series become popular, PLANET
has released the advanced industrial hardened Fast Ethernet Switch series with slim type,
IP30 metal case. The compact, IP30 standard metal case allows either DIN rail or wall
mountingtohavetheefcientuseofcabinetspace.TheISW-501T,oneofthenewmodels,
is equipped with five 10/100Mbps auto negotiation ports and operates reliably in heavy
industrial demanding environments.
Stable operating performance under difficult environments
The ISW-501T provides a high level of immunity against electromagnetic interference
and heavy electrical surges which are usually found on plant floors or in curb side
traffic control cabinets. Being able to operate under the temperature range from -40
to 75 degrees C coupled with hazardous location certification (Class 1 Division 2),
the ISW-501T can be placed in almost any difficult environment. The ISW-501T also
possesses an integrated power supply source with wide range of voltages (12 to 48V
DC) for worldwide high availability applications requiring dual or backup power inputs.
Robust switch performance
The ISW-501T offers high performance switch architecture. With the five 10/100Mbps
Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as
high as 1Gbps and the 2K MAC Address table, the ISW-501T can perform wire-speed
packetstransferwithoutriskofpacketloss.TheowcontrolfunctionenablestheISW-
501T to provide fast and reliable data transfer.
All of the RJ-45 copper interfaces in the ISW-501T support 10/100Mbps auto
negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The
standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet
device without requiring special straight-through or crossover cables.