Datasheet

IPOE-E174
2
Industrial Case / Installation
• IP30 metal case
• DIN rail and wall-mount design
• Supports EFT protection for 6000V DC power, and 6000V
DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• No external power cable required for installation
• Plug and Play installation
• LED indicators for each port in use and PoE power usage
(25%, 50% and 75%)
Standards Compliance
• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3x Flow Control
• IEEE 802.3at High Power over Ethernet
• IEEE 802.3af Power over Ethernet
• FCC Part 15 Class A, CE
Environmentally Hardened Design
With industrial-level IP30 metal case, the IPOE-E174 provides a high level of
immunity against electromagnetic interference and heavy electrical surges which
are usually found on plant floors or in curb-side traffic control cabinets. Being
able to operate under the temperature range from -40 to 75 degrees C, the
IPOE-E174canbeplacedinalmostanydifcultenvironment.
Intelligent LED Indicator for Real-time PoE Usage
The IPOE-E174 helps users to monitor the current status of PoE power usage
easily by its advanced LED indication. Called “PoE Power Usage” shown in
percentage, the front panel of the IPOE-E174 has three LEDs indicating 25,
50 and 75 percent of PoE power usage. With these LED indications, you can
monitorthePoEpowerstatusoftheIPOE-E174efciently.
Plug and Play, Easy Cabling Installation
The IPOE-E174 is quite easy to be installed by simple plug and play. It is used
between a Power Source Equipment (PSE) and the Powered Device (PD).
The IPOE-E174 injects power to the PD without affecting the data transmission
performance. The IPOE-E174 offers a cost-effective and quick solution to
doubling the standard range of PoE from 100 to 200 meters. The IPOE-E174 is
designed in a compact mini box containing 5 RJ45 ports, of which the 1 "PoE
IN" port functions as PoE (Data and Power) input and the 4 "PoE OUT" ports
on the other side functions as PoE (Data and Power) output. The "PoE OUT"
port is also the power injector to transmit DC voltage over the Cat. 5/5e/6 cable
and transfer data and power simultaneously between the PSE and PD.