User Manual

HDMI / Video Wall over IP with PoE

IHD-200PT / IHD-200PR

4.2.2. Setup Step (Examples)

1. 1 x 2 video extender

If you want to set a 1 x 2 “video extender” as shown in the following picture, you may

refer to the following table and see the steps below:

OSD 0 1

Vertical Monitor Count 1 1

Horizontal Monitor Count 1 1

Row Position 0 0

Column Position 0 0

2. 1 x 2 video wall

If you want to set a 1 x 2 “video wall” as shown in the following picture, you may refer

to the following table and see the steps below:

OSD 0 1

Vertical Monitor Count 1 1

Horizontal Monitor Count 2 2

Row Position 0 0

Column Position 0 1

Step 1

Show OSD: Check this item and all monitors will show their number on the screen.

Step 2

Row Position / Column Position: Decide which part of the screen will be applied to a

monitor.